With the development of mobile phones, there are more and more tablet computers in the electronic market. However, there are still certain differences between tablet computers and mobile phones. Today I will bring you a tutorial on how to flash a tablet computer. , this tablet computer is Onda vx610a. Many people may not know it very well. This tablet computer has a 7.0-inch 16 million color screen, which is larger than the screen of tablet computers in the same price range. It can maintain a standby time of 7 hours under continuous use. Okay, without further ado, let’s introduce the flashing tutorial for this tablet. Friends who are interested can follow the editor and read below.

Onda vx610a tablet flashing tutorial:

Step 1:

What we need to do before flashing There is some preparation work. This tutorial is to use the odin image to flash the machine, find the flash package suitable for this model, download and compress it. Prepare the data cable for use when flashing, and keep the battery in the tablet at more than 50% to avoid flashing failure due to lack of power during the flashing process. The most important thing is to back up the data on the tablet, because the data inside will be cleared after the flashing is completed, regardless of whether it is successful or not.

Step 2:

Open the flash tool, and then connect the phone to the computer through the data cable. After the upgrade area on the upgrade tool is displayed in pink, find the switch button and click it. If this is the first time the operation is performed, the computer will prompt that there is a new device, and then the driver will be automatically installed. After installation, flash the pre-downloaded flash package. After the flashing is completed, a green square will be displayed in the upgrade area of ​​the upgrade tool. Then press and hold the tablet's volume down button, power button and home button to enter recovery until a message appears on the tablet interface.Android robot location.

Step 3:

Finally press the start button in the upgrade tool. At this time, the phone is already being flashed. Never disconnect the connection, and do not press the reset button in the middle. In short, do not perform any other operations during the entire process to avoid flashing failure. Wait until the progress bar on the upgrade tool interface finishes and the tablet starts to restart. The restart time is relatively long. At this time, you can close the upgrade tool. When the tablet restarts successfully, it means that the Onda vx610a has been successfully flashed. You will see a Brand new system.

Okay, the above is the Onda vx610a flashing tutorial explained by the editor. Do you understand it? After the flashing is successful, remember to update the previous Restore backed up data.