The top cover of the ASUS K43T notebook adopts the in-membrane printing process. Its surface feels delicate and smooth, and it reveals a unique three-dimensional effect against the background of the suit. In addition, the ASUS K43T screen frame adopts the piano paint process. It is very beautiful and deeply loved by users, but after using the notebook for a long time, it needs to be disassembled and cleaned, so as to extend the service life of the notebook. Let's take a look at the ASUS k43t disassembly tutorial.

Detailed ASUS k43t disassembly tutorial:

1. Start disassembling, first pull out the battery

2. Unscrew the screws, and finally pay attention to the specifications of the screws , so that you can know which screws are of the same type, which can save a lot of time when installing.

3. After removing the hard disk cover, the right side of the hard disk is the network card. At this time, put the WIFI antenna and speaker cable Unplug it to facilitate subsequent work

4. Continue to remove the screws, which are the keyboard screws and the optical drive fixing screws under the memory cover. There is also a screw between the hard drive and the network card

5. The next step is to remove the hard drive. Push it away from the plug, lift it up, and push it to the right. The hard drive will come out

6. Pull out the optical drive< /p>

7. Remove the keyboard. ASUS laptops are basically fixed in this way. Just push it gently with a screwdriver. There are four buckles in total, and the keyboard can be taken out after pushing them in. Be careful about the keyboard cable underneath.

8. Carefully remove the keyboard cable. You have to tighten the screws again, and don't forget to unplug the touch panel and switch cables.

How to remove the cable:

< p> Use your fingernails or two small flat-blade screwdrivers to gently pull or push the white tab next to the power button and touchpad cables in the direction of the cables. You can easily pull out the cables by moving 2~3 mm. For keyboard cables, use your fingernails or a cable crowbar to gently pull up the tab and press the black tab at a 90° angle to pull out the cable.

9. Unscrew the screw pointed by the red arrow, and the screen cable will not move for the first time

10. Remove the USB, external MIC, and headphone cables

< p> 11. Unscrew the last fixing screw on the motherboard

Note that these screws are different

12. Gently unplug the screen cable

13. Take out the charging socket

　14, Now you can remove the motherboard

15. Clean the dust after each piece is removed

16. Now only the heat dissipation module is left

The screws are different, so they should be placed separately to avoid mistakes

17. Remove the fan

18. After cleaning, put all the screws back

The above is the detailed explanation of the ASUS k43t disassembly tutorial. I wonder if you have learned it? You must be very experienced before you can disassemble it. Once If you miss a step, your notebook will probably be reimbursed, so I suggest you ask professionals for help. If you are not sure, it is better not to try it easily.